Skip to content

Hire Catalogue

PROLIGHTS Smart BatPlus

Key Features

  • 4x12W RGBW LED with 11° beam angle for up-lighting
  • Chromed IP65 housing
  • W-DMX and IR remote control

Features

  • 4 x 12W RGBW CREE Full Colour LED with high efficiency collimator lens
    Battery powered, IP65 rated and W-DMX wireless DMX control
    Chromed finish and charging flightcase option

Light Source

  • Source: 4x12W RGBW LEDs
    Luminous Flux: 1,162lm
    Lux: 2,064lux @3m
    Source Life Expectancy: >50,000 h

Optics

  • Beam Angle: 11°
    Field Angle: 19°

Colour System

  • Colour Mixing: RGBW/FC
    White Presets: 3200-9000K
    Colour Wheel: Virtual colour wheel with presets
    Macros: Built-in white presets

Dynamic Effects

  • Static Colour Mode: Selection of static colour
    Manual Colour Mode: Manual adjustment of colour
    Auto Mode: Built-in programs with execution speed adjustment

Body

  • Tilt Angle: 20° Adjustable foot support for tilt regulation (up to 20°)
    Body: Sturdy die-cast aluminium body conceived for long-time durability
    Body Colour: Mirror finishing

Control

  • Protocols: DMX512
    DMX Channels: 3/4/6/10ch
    W-DMX: Included, Wireless Solution receiver
    Display: Black OLED touch display
    Firmware Upgrade: Yes, via USB-DMX interface (UPBOX1) not included
    IR: Infra-Red sensor controlled by remote

Electronics

  • Dimmer: Linear 0~100% electronic dimmer
    Dimmer Curves: 4 different dimming curves available
    Strobe/Shutter: 1-25Hz, electronic
    Operating Temperature: 0° ~ +35°
    Flicker: Flicker free operation

Electrical

  • Power Supply: 100-240V – 50/60Hz

Battery

  • Battery: 16.8V Lithium
    Autonomy in colour change mode, up to: 12h
    Autonomy in permanent white full-on, up to: 8h
    Recharge Connection: Magnetic fast-charge in case
    Recharge Time: 4h/max
    Battery Status: Shown on Display

Physical

  • IP: For temporary outdoor use – IP65 (front) – IP54 (bottom)
    Cooling: Natural cooling of the peculiar chassis and to absence of fans
    Suspension And Fixing: M12 threaded insert for easy clamp installation
    Dimensions (WxHxD): 138x145x202mm
    Weight: 3.6kg
Weight3.6 kg
Dimensions202 × 138 × 145 cm